RADAR CALIBRATION FOR COLLISION REPAIR FACILITIES
Radar Sensor Calibration in Phoenix, AZ
Support for collision repair shops when bumper, structural or related repairs may affect radar-based driver assistance systems. We coordinate applicable vehicle-specific procedures, calibration and repair documentation.
When Collision Repairs Affect Radar Sensors
Radar sensors help operate features such as adaptive cruise control, forward collision warning and automatic emergency braking. Depending on the vehicle and repair, work involving a bumper cover, grille, radar bracket or mounting area may trigger an OEM inspection, aiming or calibration requirement. Structural repairs and changes affecting vehicle geometry may also be relevant.
A sensor does not have to look damaged for a procedure to be required. The repair plan, diagnostic information and the manufacturer’s service information should guide the decision.
Static and Dynamic Radar Calibration
The required process varies by make, model, year, equipment and repair. Some vehicles call for a stationary target-based procedure, some require a prescribed road test, and others specify a combination. We follow the applicable OEM service information rather than applying one process to every vehicle.
Static Procedures
Stationary calibration using the specified targets, measurements, setup and environmental conditions required for the vehicle.
Dynamic Procedures
A prescribed drive under the manufacturer’s conditions, which may include road, speed, traffic and environmental requirements.
Combined Procedures
Some vehicles require both static and dynamic steps. We coordinate the complete sequence when specified by the OEM.
Coordinated With Your Collision Repair Workflow
We work directly with estimators, production managers and technicians to coordinate radar calibration with the repair plan. Before the procedure, the vehicle must meet the applicable OEM prerequisites, which may include required repairs, alignment checks, tire pressures, ride height, battery support, diagnostic steps and suitable site conditions.
Mobile service is available when the vehicle-specific procedure, equipment and facility conditions allow. If the procedure requires a controlled environment or conditions that cannot be met on-site, we can coordinate an appropriate in-shop or alternate arrangement.
Completed calibration results and relevant documentation can be provided for the repair file and final quality-control process.
Need Radar Calibration Support for Your Shop?
Talk with Dynamic Calibrations about a vehicle, a current repair or a recurring collision shop partnership. Call 623-313-0035 or contact our team to coordinate service in the Greater Phoenix area.